![Doc Glock](/img/default-banner.jpg)
- 27
- 190 889
Doc Glock
Приєднався 19 гру 2006
LCP Classic v. Bodyguard .380 Trigger Pulls
Just demonstrating the BG380’s double strike capability and the LCP’s non capability.
Переглядів: 1 545
Відео
Barbell comparison: Rogue Bar 2.0, B&R (Burgener & Rippetoe) bar by York, Rogue Power Bar 2.0
Переглядів 518Рік тому
Barbell comparison: Rogue Bar 2.0, B&R (Burgener & Rippetoe) Bar by York, Rogue Power Bar 2.0. I just got a new Rogue Power Bar from their Boneyard collection of seconds. I compare it to nine year old B&R bar and Rogue Bar 2.0. I have not been entirely happy with the Rogue Bar 2.0 probably because I don't do a lot of Olympic lifting. I find the knurling too fine, there is no center knurling so ...
Ruger LCP II Lite Rack in .22LR Safety Removal
Переглядів 15 тис.2 роки тому
In this video I demonstrate how to disassemble and remove the manual thumb safety and magazine disconnect safety from a Ruger LCP II Lite Rack in .22LR. I don't recommend you do this but I don't like safeties on my personal use pistols. They are relatively easy to remove without permanently altering the pistol and can be reinstalled at any time. I do not think removal affects the drop safety of...
Wilderness Safepacker Hack
Переглядів 3552 роки тому
I like the Wilderness Safepacker for hiking or especially biking with a pack. However when taking the pack off or in rough terrain on the bike, it often migrates toward the front of the belt. I figured out a way to use a tri glide to loop excess belt around the Safepacker and hold it in the 3:00 position even with jostling, or if the belt is not fastened.
Waxy Minimag Load and extract
Переглядів 1012 роки тому
This is how they come out of the box. No bueno. The wax ring on these cartridges gums up this particular revolver.
Clean Minimag loading and extraction
Переглядів 772 роки тому
These have had their wax ring wiped off. Move smoothly.
Shooting LCP MAX at Five Yards
Переглядів 7753 роки тому
I think it is going to be a good little gun. Splits about 0.31 in this video. Ejection is fairly strong and straight up.
Gemtech MIST 10/22 Extraction Fixed
Переглядів 2333 роки тому
My Gemtech MIST 10/22 barrel would not extract due to the extraction channel not being cut deeply enough from the factory.Gemtech was being difficult about getting it fixed since they are now owned by Smith &Wesson. My neighbor fixed it with a file in 5 minutes. Demonstrated is the extractor removing a practice round with good control of the round.
Beretta 92 DXR Trigger Not Resetting
Переглядів 11 тис.3 роки тому
In the past 1000 rounds my Beretta 92 DXR trigger has failed to reset five times. The problem has gotten worse as the pistol got dirtier and when returning the trigger more slowly. Pushing the trigger forward resets it. The issue is, I think, drag on the trigger bar from the Beretta brand plastic over grips. I relieved the grip a little, cleaned the gun and the problem went away.
Pistol Action Types: DA, SA, DA/SA (TDA), DAO, SFA
Переглядів 1224 роки тому
In this video I briefly demonstrate various handgun action types including single and double action revolvers, double action only, double/single action, single action only and striker fired pistols. Demo guns include : Ruger Blackhawk (Single Action revolver) Ruger LCR (Double Action revolver) Beretta 92 (Double action only and DA/SA versions) Heckler and Koch P30L (DA/SA) Sig 226 ( Da/SA) CZ 7...
Shooting Smith & Wesson 43C .22LR
Переглядів 9 тис.4 роки тому
Shooting the 43C with Velocitors. So far mine has been reliable with anything but Minimags which seem to lock it up.
Wilderness Safepacker Testing
Переглядів 3344 роки тому
I have been using a Wilderness Safepacker for the past ten years for carrying a pistol while riding a mountain bike. Some of my riding is in difficult terrain. The Safepacker keeps the gun safe during falls or encounters with rock or vegetation and keeps the gun securely attached to the pack belt so it doesn't flop around. The Safepacker is also quite discrete. In ten years I think only two peo...
300 BLK Subsonic Full Auto
Переглядів 1,7 тис.4 роки тому
Borrowed a friends registered full auto lower and it worked great with my 8” 300 BLK upper and Gemtech 300 GMT with subs.
Walther PPQ Striker Release with 18" Drop
Переглядів 3,8 тис.4 роки тому
Walther PPQ Striker Release with 18" Drop
VP9 Striker Drop with Impact to Grip
Переглядів 5 тис.4 роки тому
VP9 Striker Drop with Impact to Grip
The 43c is a good gun, but not almost 200 dollars more than the ruger lcr 22lr, over priced
Dude you don't need to be working on your pistol your ham handed
You should see me do surgery! Bloodbath.
How's that bare steel OPB now that you've had it almost 1 year? Too rough on the hands or is it okay?
I like it. It’s rough but not tearing me up. That said, of the three I still like the B&R bar best.
Stick to ruining glocks
The Classic & Yes pls , sold my 6yr old Onix , in need & went to good home . This Christmas friend drops off bottle of Wine , Dog bisquits for my Hog Fetching Dog & my missed Mouse Pistol. Like a Child that came home .
Damn, did something wrong. Trigger wont go back to forward position on its own now. Edit: If anyone else has this issue (Trigger not moving to the forward position after being pulled and also locking up once pulled forward manually) Check that the spring wound up just above the trigger itself (its obvious to me now that theyre attached) is pressing against the trigger bar. If it is pressing against the chassis, then you will need to wind it back around and set it so that it is pressing (acting in an upward force) against the trigger bar. There, I present to you both the problem and the solution. Much like governments. I have your back ;)
Great video sir thank you
Sw 43c is a revolver
You are 100% right. I uploaded the wrong video!! Will change title. This is LCP Max
@@enelnelson 🤜🤛
I'm debating between the ohio power bar, B&R bar 2.0, and a regular ohio bar to be used as a do-it-all bar with the exception of olympic lifts. Mainly will be used for squats, deadlifts, bench, OHP, & bb rows. Which bar would you go with if you were me? Do you find the aggressive knurling of the power bar to be a hinderance in any of the lifts I mentioned? Which bar would you personally choose if you could only go with one?
First: you can't go wrong with any of those. Decide which finish you want. If it is Zinc you are down to the Ohio bars. Then decide if center knurling is important to you? That will finish the decision. For sure I would pick the B&R bar as a do all. I love mine still and if I only had one bar that would be my choice. I used to find center knurl important for squats but for some reason as I became more experienced it became less and less important. But maybe I just don't lift heavy enough for it to matter any more. Center knurl can limit leg position on deadlifts and for sure is a detriment for Olympic lifts, so if you plan to do them some day you may want to avoid it. As you can see from the video, the Zinc finish does not hold up well at all. The B&R bar still looks pretty nice and it is oh so grippy!
Both of those safeties make this gun safer for everyone. The magazine safety is there to prevent the number one cause of accidental shootings. Quite often someone will remove the magazine, but forget there is a round in the chamber, leaving the opportunity for someone else to assume the gun is safe and pull the trigger to feel what it feels like.....shooting the person next to them. The thumb safety prevents children from shooting each other. Anyone who removes either of these safety devices is an idiot and a hazard to others.
Why didn't Ruger put the same safeties in the .380 version of the LCP II then? Your logic is dumb and you're probably a fudd lol.
Pipe down. Tryna focus man.
@@Jonbo117 and what will you do when you grow up?
If someone shoots themselves while servicing their gun. It's on them. If someone leaves their gun out in the open for a kid to play with (assuming the child isn't aware of and respectful of guns) it's also on them. Tf are you on about (rheotorical)? Youre not the arbitrator of public safety and morever your type are simply annoying to me. Mind your own damn business!
Just leave the safety off if you don't like it. Why void the warranty?
Carry guns get banged around. I dont know why people are saying this is fine. You can get jumped on the street and thrown to the ground and your gun might not work when needed. Now the striker instead of chamber indicator and cocking rear wings are starting to make sense...
I'm working on making a .380 slide work on the 22 model and I was wondering why the 22 frame has those cutouts at the front to shorten the rails. Do you know why they did that?
I have no idea.
This will not result in the weapon discharging. Unless you bought the VP9 with the intention of using it as both a sidearm and hammer simultaneously, this is not a problem.
I carry the 617 22mag but the ejection sucks. 22lr you get 1 more round and with federal punch it’s a great gun. Obviously I shouldnt need to reload after 7 shots of 22mag but for practice it’s way more fun to have a gun that ejects.
If its hot or dirty. The 43c will have ejection issues. Less so with subsonics, but punch. Minimag, stingers etc, after 20-40 shots it starts having ejection issues with defensive ammo. Never happens in first 8 to 16, so I just clean gun each range trip and it runs great first several cylinders.
I think there's a small hole in the side of the grip to hold the sear forward, so you can take out the chassis and put it back in without a hassle. You can put a punch in there hold push and hold it forward. Then you just pop the chassis back into the grip and pull out the punch from the hole. (edit: If you don't have a long skinny punch or a screwdriver to use, a paperclip can work and one time I used a tooth pick... so it opens up a couple options if you don't have the right tools).
Thx
Any idea how the safety works exactly? Seems like it came out so easily and is such a simple part... but I couldn't see how it works exactly (like a hammer block, sear block, trigger block, etc...)...
@ 5:50 - I bet I know where the “92” came from❗️😂
Do they sell a plug for the safety hole?
Ebay does
Just stopping by to say thanks for this video It took me a couple trys to get the gun to function after dissesembly What I did was flipp the mag disconnect spring so the tension would keep the disconnect facing up all the time I also kept my manual safty ........... now I can fire the gun without a mag Regards, Rick
Do you still have your safety lever. If you do I’ll buy it from you.
I watched your video and thank you for the explanation on the safety removal. It gave me an idea. I decided to forgo the trouble and placed a pin head size drop of 5 minute epoxy on the safe side and pushed the safety forward to the fire position. After 5 minutes the problem was solved with out disassembly and no cavity where the safety was. I will live with the magazine disconnect intact.
One of my favorite j frames
Does it work in 642 holsters? Looks like it should.
Any j frame round butt holsters work in my experience so 642 compatible work@@soundsnags2001
Just recently experienced the same issue with my brand new 92x centurion after putting like a 500 rounds or more through it. 1st I thought it was carbon and grit build up from running it suppressed, then I thought the trigger bar spring was worn and lost its tension. But even after cleaning and oiling and checking the trigger bar spring tension the issue periodically happens when dry fire testing or using snap caps. It truly sucks because I now feel uncomfortable that I may have a dead trigger pull when its most needed. For that reason alone I’m going to stop carrying it. Till I hear something back from beretta, I read someone else had the same issue back in 2022 but he left no update about any fix. Returning back to my HK to carry, that gun runs well and never gave me any trouble even with multiple rounds put through it.
Replacing the grips with non factory plastic took care of my problem.
Just loosen the upper grip screw on trigger bar side till figure out your grip situation. Put the 1st 200 rds through mine today. Love it
I prefer to have a manual safety on a pocket pistol. That was the big seller for me over the .380, which doesn’t have one.
I have heard if you disbale the mag safety the gun has less fails to fire
Yes, this video is very helpful, I don't like safeties either. Thanks
22s are fun! Got a couple LCRs that I ❤
Thanks so much! I love my LCP .22 and carry it with Aguila Interceptor 40 grain. They clock an actual 1000 fps on my chronograph out of this little gun.
I ordered the little blocking piece to take its place put the gun back together not quite sure what I did wrong but the trigger no longer works so looks like it's going to the gunsmith next weekend
Yoyo, same here. Not sure what i did lmao Did you figure it out?
Nvm, figured it out. The spring on the trigger unwound itself and caught itself in a way that didnt seem to be out of place. Essentially relieving spring tension on the trigger bar... put it back (10 months later lol).
@@Jonbo117 Yes, I figured it out the following day. That's pretty much exactly what happened. I had that trigger spring around the opposite direction of what it really needed to be. That's why I'm a mechanic and not a gunsmith
@@davidbrewer8402 Cheers bro! How is it running (if you dont mind my asking)? Gonna test mine soon. An anecdote could be useful to me though.
@@Jonbo117 so far so good. I ran several different types of ammo. It absolutely hates. Angula how are you spell it made in Mexico stuff. CCI mini mags does okay, but I've had the best luck with no malfunctions with federal punch but also ran approximately 400 rounds of just regular Target ammo and it did good so basically I just got a bucket of Winchester Target rounds and just started burning them up then testing other rounds to see how they did. But like I said I keep it loaded with federal punch
Funny ejection
nice recoil, very manageable... 💪😁
Sounds like a Double tap or sear? Problem??…
อยากได้ครับ
First pistol I shot when I was 6 in the 1990s. I remember it being finicky with 22lr did alright with thunderbolts. You also got to worry if it doesn't fire then you got a stuck 22 in the chamber. If you look past those problems It's a fun pistol to shoot and I'll probably pick one up in the near future. As for pocket 380s 9 out of 10 suck to shoot, terrible triggers, narrow in the hand. I can say the 3032 tomcat in 32acp. Fits in the hand well, decent trigger, and I can hit steel plates at 25 yards. With the newer polymer 380s my shoot time is really slow and I'm lucky to hit 15 yards consistently.
Got this from my FFL yesterday ( S & W 43C ) J frame @ 11.5 ounces but got the Wilson Combat trigger kit to install / then clean / then range !
Thanks for the info! I can't wait to delete the mag safety.
AWESOME" THANKS!
I'm glad your opinion is favorable; I've got a new FDE "COVERT" model on layaway. I had a LCP ll "lite rack" .22lr but sold it because I just got no consistent reliability from it regardless of the ammo I tried, and I tried a bunch. I'm looking forward to the Beretta, mainly because it seems so solidly built. We'll see.
How did it go???
Is there any reason to leave the internal portion of the safety and it's spring in place? As near as I can tell on mine, it serves no purpose other than taking up space on the frame pin.
You do realize that you just deactivated the little dingus on the trigger as well right?
Actually, I did not. I like the dingus. I'd prefer it to work. I'll take a closer look at this when I get home. Thanks for pointing this out.
@@enelnelson I just checked again and I might be mistaken looks like the edges of the dingus might catch the fcu so you should be good to go , I’ll have to remove mine too now! Lol 😂 but check and makes sure just in case Just checked there’s only half a millimeter on each side , not too much there . Hmmm 🤔
@@22Phanatic my dingus works just fine against the frame of the pistol. It is not deactivated.
Thank you for showing this/doing this, now can you ask someone to make a plug for it maybe using a 3d printer? lol
That’s what I’m doing.
i shot a Smith & Wesson today not the one he has but a model 617 it was fun also good gun for beginners its low recoil and good for kids
Thank you for the detailed video! Followed it step by step and knocked this out on mine with no issue!
Great video. Just purchased it yesterday. With a box of high velocity🤘❤️🇺🇸
Disassembles just like a Keltec. Internals are almost exactly the same, too.
Chassis, look up pronunciation. Driving me nuts!! 😆 the last s is silent.
Oui.
Beautiful little pistol.
I just leave the safety off and pretend it’s not there but that magazine safety annoys the shit out of me
That’s a bad idea. If you ever needed to use the weapon in a hurry it would be a shame if that’s the one time the safety was active and it took you a half second to realize it and react.
@@evanthecameraman yeah i hear ya, i don’t actually carry a pistol with a safety and I wouldn’t actually use the 22 lcp for any kind of defense though, it’s strictly a plinker
I removed my magazine disconnect in hopes of smoothing the crunchy trigger. It helped a lot. When shooting the LCP .22 I noticed the trigger hit 2 or 3 walls & I didn't;t know when it was going to fire. Felt crunchy. Much smoother now. I shoot it better & it's much more enjoyable. Also more reliable. It was running about 90%. One failure per mag. Now it hasn't failed in hundreds of rounds. I left the manual safety on it because I use this to train new shooters (also a Taurus TX22) & they freak out over not having a safety until they learn more.
Galloway precision makes a spring kit for the little lcp that will most likely take it from 90% to 100% reliability. Worked wonders on mine. Havent had a gun related malfunction since.